Jump to content
N-Europe

Recommended Posts

Posted

Yeah, if the wired hardware works that means the ports can't have changed radically (like to digital from analog or something)

 

While it wont be pretty, and you might have to have your console angled at the place you're sitting (it's infa red ain't it?) it should work fine.

 

You might get really lucky and find that Nintendo have built the reciever into it for you :) but that's a big might.

Posted

After tasting the joy that is the wireless Logitech pad for the PS2, I can't stand any controllers with wires anymore. Hopefully Nintendo will do something about this.

Posted

While it wont be pretty, and you might have to have your console angled at the place you're sitting (it's infa red ain't it?) it should work fine.

 

Wavebird Wireless controllers use radio frequency signals, that's one of the reasons why they were so great. :D

Posted
Wavebird Wireless controllers use radio frequency signals, that's one of the reasons why they were so great. :D

 

yeah I remember seeing an ad in a gaming magazine where there was a guy taking a dump in his bathroom while playing using the Wavebird and using a mirror to see what was going on on the screen

Posted

Hahaha yeah that was in a movie first, the guy used it so he could watch the sports on ESPN while taking a crap.. obviously was adopted for gamers.

 

Yeah I think it would be reasonable for Nintendo to implement an RFID tracker that is compatible with wavebird and Revolution's free hand controller.

Posted

Reggie said last week that when you play a Gamecube game on the Rev, you will only be able to play it with gamecube peripherals, and all of them are compatible. Wavebird, microphone, bongos, etc.

  • 6 months later...
Posted

Yes it'll work after all the console is built predominately around gamecube hardware so why wouldn't it work? There shouldn't be any interference with the Bluetooth signals. Also the side flap where the gamecube controller ports are located folds back in such a way that it goes flat so it does not block the RF transmittor so you're free to plug in the RF transmittor and use the Wavebird controller, this was definitely confirmed somewhere, can't quite recall where though...

 

The only thing i'm no so sure about is whether if you plug in 4 wired GC controllers into the Wii ports, and the console is standing vertically, will it remain stable. It wouldn't look too good, it'll take away from the sleek design of the Wii.

Posted
Bumpity bump bump.

 

When Wii comes out, can some one confirm if it works or not??

 

The flap is designed so that the controller ports are not directly in the center - perfect for the WaveBird adapter. Basically the Wii is designed for the WaveBird.

Posted

It is wireless in the sense that you don't connect it to a controller port, but just like the Nunchuck attachment, a wire is used to connect it to the Wiimote. So basically, if you playing a VC game, you'd have the Wiimote stationary on the side while you play that game.

Posted

The ultimate design for the Classic controller is not to have a fixed cable like they currently have, but to have a double headed USB connection [the tip that snaps into the Wiimote] but on both sides, meaning that you can have the Classic Controller completely wireless while playing games not requiring the Wiimote so you don't have this cord sticking out making it akward, yet also having the option of connecting it back to the Wiimote if there are special games that use the motion technology in the Wiimote.

Posted

It appears not, I don't think any Nintendo representative has said that the Classic Controller shown is indeed the final design. Modifications can still be made, but nothing major, expect something very similar if not exactly the same to what we've seen.

×
×
  • Create New...