Dcubed Posted May 23, 2021 Share Posted May 23, 2021 Wow! Great job! How did you manage to find a compatible PSU!? Link to comment Share on other sites More sharing options...
Will Posted May 23, 2021 Author Share Posted May 23, 2021 It’s just a kit that is meant for a PC (I think) that someone has created instructions for hooking up to a Saturn. Definitely nothing smart on my side other than figuring out different pins I could use to power my particular model. 1 Link to comment Share on other sites More sharing options...
martinist Posted May 23, 2021 Share Posted May 23, 2021 Are you kidding? I had trouble opening up a PS1 controller last night. Was trying to fix an analogue stick that is permenantly stuck down. Couldn't do it, some wires were souldered from the controller board to the rumble mechanism so i couldn't pull the board all the way out, all i had was a screwdriver. Link to comment Share on other sites More sharing options...
Will Posted May 26, 2021 Author Share Posted May 26, 2021 I finally had some more parts I’ve been waiting for, and this time it’s a good one, I present to you: The GBA SP Unhinged Mod Today I’ll be taking my GBA SP from when I was a kid and hopefully be turning it into something quite amazing. This is my original GBA SP and the front shell of the Boxy Pixel aluminum shell that will turn it into something that resembles the original game boy more so than any of the GBA models. These are the various parts, the front, a back for the screen and the main body and a battery cover. I started by taking apart the original machine, nothing too taxing here, just get the right screwdriver and go for it. The ribbon cable for the original screen comes out nice and easy and you’re left with the board for the GBA SP. The first thing I wanted to do was replace the switches in the shoulder buttons. If you remember they are super mushy and I wanted to make them have a nice feeling click. This is the new button, much much smaller than I thought it would be. Taking out the originals went ok, they were just soldered in the four holes on the left of the shot. Went a bit easier than I thought. No supports with the new buttons so just a case of two solder points each and I’m ready to carry on. Inserted the new buttons into the shell, these are also machined aluminum as they need to be bigger than the originals to fit the new shell. I added new membranes to give it as good a feel when playing as possible. A new speaker to make it sound as good as possible. And a USB-C charging board to bring it into the modern day and allow me to use the many newer chargers I have around the house. Wire in the board ready to connect to the main board of the GBA. This is the modern LCD screen I’ve got to go in it. Never seen one in person but from the videos I’ve seen this should really make a big difference. Connecting the screens ribbon cable is pretty easy, but soldering in the tiny blue cable is a bit tricky. Not essential but worth doing as that will allow me to control the brightness with the proper button later on. Tape down the screens driver board and we’re good to continue on. Add the board and the screen into the front case, now it’s starting to take shape. Solder the USB cables into the original charging port. This was pretty fiddly but seems to have worked in the end. Added the back to the screen and we’re into the final few parts of the mod. Add in the posts that will hold the shoulder buttons in place. I also have this battery I’m going to replace the original with, should make it last for a really long time between charges. The battery solders in to the back of the original battery connector - I could cut it out and use the original later on if I really wanted to. I’ve also added in the shoulder buttons ready for everything to be put together. The final thing to add in is the cartridge guide/shielding, should be good to put it together now. Screw in the main rear housing. Wow! Looks really awesome IMO, just hope it actually works. Time to test it out: YES! I had a few scares with some of the soldering so I’m really pleased it’s working. Here it is on the title screen of Mario Kart - that screen was really worth the investment, looks super awesome. The original Mario Land also looks great, this picture doesn’t do it justice. I’m really glad I did this, the new shell is just so cool and the screen makes a massive difference to being able to enjoy playing games. There are a few things I need to do to finish this still. The screen is a little loose so I need to secure it better, then I need to add some hot glue to the power light holes as you can’t really see the lights all that well, finally I need to spend a bit of time and install a headphone jack. Definitely recommend this to those of you thinking about doing it yourselves. 7 2 Link to comment Share on other sites More sharing options...
Dcubed Posted May 26, 2021 Share Posted May 26, 2021 Looks awesome! Great job! And yeah, the IPS screen makes a world of difference; literally generations ahead of even the backlit AGS101 screen! Link to comment Share on other sites More sharing options...
Will Posted May 29, 2021 Author Share Posted May 29, 2021 Yeah the IPS screen is a total game changer, don’t think I’ve ever enjoyed playing game boy stuff so much. The case is also super nice and the deeper buttons than the original SP make it feel much better. Had an issue that the battery wasn’t charging, figured I’d messed up the soldering or something. Opened it up, did absolutely nothing to it, closed it again and it works perfectly. I guess something was just housed a bit weirdly and needed a bit of a rejig. Decided I’m not going to bother with the headphone jack, and instead try to install a Bluetooth module. Not sure how well it will work with the metal shell but may as well give it a try. After that I need to figure out what my next project will be, really not sure what to go for at the moment. 1 Link to comment Share on other sites More sharing options...
Recommended Posts