Jump to content
N-Europe

Can you overclock a Dell?


MoogleViper

Recommended Posts

After reading up on overclocking a PSU and then staring perplexedly at the Bios, I thought that it might be Dell that is the problem. Lo and behold, after a little research, it seems that Dell's can't be overclocked that way. But there was a lot of guides explaining how to do it another way, and a lot of warnings saying don't do it at all. Do you guys know if you can do it safely? I don't want a massive OC just a small one to boost performance a little.

 

I have an E4500 @2.2GHz. Thinking about putting it up to 2.4-2.6ish.

Link to comment
Share on other sites

Guest Jordan

Technically speaking, you can overclock anything... but a Dell could need a BIOS flash (basically a rewrite) which is possible but:

 

1, It depends on if your board is a custom Dell board of its a normal manufactured one.

2, Even if its not custom Dell, doing so is likely to balls your machine up 90 ways from Sunday... so its not recommended at all.

 

Afaik, theres no way to raise your FSB or multiplyers within Windows (although i'm probably wrong).

 

Speaking of overclocking. This is what i managed (admittedly... i could push it further but this is still a very nice temp and speed) with the new fan i bought.

 

zoomyu3.jpg

Link to comment
Share on other sites

Don't mention the words safe and overclocking together :indeed:

 

Overclocking is always dangerous because you stress hardware beyond its tested capability. Yes Intel often sells CPU1 with 2GHz and CPU2 with 3GHz and both are from the same branch - but that does not gurantee success at all.

 

More/less voltage for a electronic device is dangerous and seriously hurts the components if you are in bad luck. Even if it works - the increased power amount, lack in cooling, ... silent but deadly killer.

 

Don't know much about Dell ... maybe they offer there components already at their limits that might be a reason why overclocking a Dell machine is a bad idea.

Link to comment
Share on other sites

OCing can be fun sometimes, but going from 2.2GHz to 2.4 or 2.6GHz probably won't give you much of a noticeable difference. Think, do you actually need to overclock?

 

Well this will be my first OC so I just want to test the water first.

 

Don't mention the words safe and overclocking together :indeed:

 

I meant as safe as overclocking any other computer.

Link to comment
Share on other sites

×
×
  • Create New...