Fuzpoy Posted October 18, 2007 Share Posted October 18, 2007 I have put in a new stick of ram (1GB) but the system won't recognize its in there, It can be seen when i run cpuz but windows won't see it still. I've tried moving them round, it still didn't work and tried starting with just the 1GB in but it just beeped at me. System: 2 x 512MB RAM PC2700 Non-ECC 1 x 1 GB RAM PC2700 ECC Motherboard - DFI LANParty NF2 Ultra B Link to comment Share on other sites More sharing options...
system_error Posted October 18, 2007 Share Posted October 18, 2007 Try the Taskmanager to check if there are 2GB physical memory available - otherwise I always thought you must not mix RAM size and shouldn't leave a slot empty. Always 2 x 512, 2 x 1GB, .... Link to comment Share on other sites More sharing options...
Fuzpoy Posted October 18, 2007 Author Share Posted October 18, 2007 I don't know about mixing sizes but there are only 3 slots on the board. I'm on the other computer right now but i'm pretty sure it was at 1GB too still, Windows won't recognice is but the Crutial memory test sees it and so does cpuz. Link to comment Share on other sites More sharing options...
Blue_Ninja0 Posted October 19, 2007 Share Posted October 19, 2007 If it beeps you with just the 1GB in the computer I think it's a pretty much strong indicator that something is wrong with it or that your board is not compatible with it, so i would trade it in. Link to comment Share on other sites More sharing options...
Fuzpoy Posted October 19, 2007 Author Share Posted October 19, 2007 I'm thinking its incompatable but it doesn't make sence as i know it is the right type. Link to comment Share on other sites More sharing options...
Recommended Posts